Difference between revisions of "Builder Road Map"

From Open Mower Wiki
Jump to navigation Jump to search
(xx)
(More material)
Line 9: Line 9:
This material is provided as-is and free of charge. No guarantees of any kind are made that the information contained herein is exact or correct or does not violate any local regulations or cause any security risk. Any use you make of any information given here is at your own discretion and risk.
This material is provided as-is and free of charge. No guarantees of any kind are made that the information contained herein is exact or correct or does not violate any local regulations or cause any security risk. Any use you make of any information given here is at your own discretion and risk.


=== Get a mower in a store ===
=== The Mower ===
 
==== Get a mower in a store ====
So far only the Yard Force 500 is supported. See [[FAQ]] for more about alternative mowers.
So far only the Yard Force 500 is supported. See [[FAQ]] for more about alternative mowers.


==== Disassemble the mower and Remove the old mainboard ====
==== Disassemble the mower and Remove the old mainboard ====
See @c.ez's YouTube video https://www.youtube.com/watch?v=_bImqD-pQSA  
See @c.ez's YouTube video https://www.youtube.com/watch?v=_bImqD-pQSA
 
Now, it is ready for a new main board.
 
=== Main board ===
At the time of writing, the main board is version 0.9.1beta and has a few issues (but is working!!), so you can either go from there or you can wait until a next revision fixes these problems.
 
[TODO] : @tinker0436 and @vamatis will try to see if a comprehensive description can be made on how to order an assembled main-board from JLCPCB.
 
[TODO]: @c.ez : How does one find a current BOM for the main board if going to build one-self?
 
==== Parts for the main board ====
You need
 
You should end up with an assembled main board, ready to supplement with
 
 
=== Charging Station ===
 
===== Get a CC/CV module =====
This is currently needed to fix the charging station provided by Yard Force due to incompatibilities with the replaced main-board. It should be possible to fix this issue, but right now, it is necessary. See [[Building the Mower]]  for where to get it.
 
==== Upgrade the Charging Station ====
[TODO] no information yet here
 
 
 
 
 


=== Get a CC/CV module ===
This is currently needed to fix the docking station provided by Yard Force due to incompatibilities with the replaced main-board. It should be possible to fix this issue, but right now, it is necessary. See [[Building the Mower]] for where to get it.
__FORCETOC__
__FORCETOC__

Revision as of 11:14, 1 May 2022

Note: This project is still very early stage and you must be prepared to find a lot of info yourself and to talk to other builders in the Discord. See the FAQ for a quick overview of the state and nature of this project.

If you want to embark on building an OpenMower, we have collected an overview of the various parts and where find information and what to to below.

Please see the image to the right for an overview that we will refer to. The headlines below refer to this image.

Road map.png

Disclaimer

This material is provided as-is and free of charge. No guarantees of any kind are made that the information contained herein is exact or correct or does not violate any local regulations or cause any security risk. Any use you make of any information given here is at your own discretion and risk.

The Mower

Get a mower in a store

So far only the Yard Force 500 is supported. See FAQ for more about alternative mowers.

Disassemble the mower and Remove the old mainboard

See @c.ez's YouTube video https://www.youtube.com/watch?v=_bImqD-pQSA

Now, it is ready for a new main board.

Main board

At the time of writing, the main board is version 0.9.1beta and has a few issues (but is working!!), so you can either go from there or you can wait until a next revision fixes these problems.

[TODO] : @tinker0436 and @vamatis will try to see if a comprehensive description can be made on how to order an assembled main-board from JLCPCB.

[TODO]: @c.ez : How does one find a current BOM for the main board if going to build one-self?

Parts for the main board

You need

You should end up with an assembled main board, ready to supplement with


Charging Station

Get a CC/CV module

This is currently needed to fix the charging station provided by Yard Force due to incompatibilities with the replaced main-board. It should be possible to fix this issue, but right now, it is necessary. See Building the Mower for where to get it.

Upgrade the Charging Station

[TODO] no information yet here