Difference between revisions of "Flashing firmware on the Pi Pico"

From Open Mower Wiki
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 7: Line 7:
'''''Directly copied from a discord conversation'''''
'''''Directly copied from a discord conversation'''''


use the .bin file if flashing via openocd or the uf2 file for flashing via usb mass storage
use the <code>.bin</code> file if flashing via openocd or the <code>.uf2</code> file for flashing via usb mass storage




Line 17: Line 17:
on your raspi do<syntaxhighlight lang="shell">
on your raspi do<syntaxhighlight lang="shell">
cd open_mower_ros/utils/scripts/
cd open_mower_ros/utils/scripts/
sudo ./upload_firmware.sh /path/to/your/firmware.elf</syntaxhighlight>
sudo ./upload_firmware.sh /path/to/your/firmware.bin</syntaxhighlight>
{| class="wikitable"
{| class="wikitable"
|+Neopixel color
|+Neopixel color

Latest revision as of 12:34, 5 August 2022

Very rudimentary for now - check https://www.youtube.com/watch?v=_bImqD-pQSA



How to flash the pi pico from the raspberry pi using openocd

Directly copied from a discord conversation

use the .bin file if flashing via openocd or the .uf2 file for flashing via usb mass storage


bridge the jumpers like on the right picture (you can leave them like this during normal operation, the idea is that instead of the jumpers you can use an external debugger on those pins as well)

Bridge-these-Jumpers-for-flashing-Pico-via-SWD and OCD.jpg


on your raspi do

cd open_mower_ros/utils/scripts/
sudo ./upload_firmware.sh /path/to/your/firmware.bin
Neopixel color
red during boot
orange - red flashing emergency mode and ros is disconnected
green - red flashing emergency mode and ros is connected
steady green ros is connected and no emergency mode is detected

(all voltages are OK, wheels aren't lifted, emergency button is not pressed)